How to Install fenders on your bike ?

How to Install fenders on your bike ?
You will need:
  • Bicycle wings
  • Screwdriver
  • Wrench
  • Bike
# 1

Install fenders on your bike usually does not cause particular difficulties and than it resembles the children's designer.Much more complications is the choice of bicycle wings themselves.By choosing the wings should be taken with the utmost seriousness, because this question you are facing a dilemma between price and quality of goods.So before you buy, you need to prioritize and decide what is more important the quality and durability of the product or its cost price.

# 2

So now, when the bicycle fenders are selected, you can proceed directly to their installation on the bike.As mentioned above, the cycle wings installation does not require a lot of effort and is quite simple.Therefore, to install the wings on the bike, even a child can with proper guide.

# 3

start assembling the wings with the front wheel.Tray front wing wheel of the same name, and fasten it to the gorilla front forks with a screw and fasten the bac

k of the nut.When tightening the nuts need to find a middle ground, t. To. If you drag the nut, the cheap wing can break, if not make it then it will hang, is not protected from flying in the face of mud.

# 4

Now you can install the second wing, that is, the rear wheel of the bicycle.rear wing mountings can be of two types.In the first case, the wing is attached to the seat mount.To do this, you need to use a screwdriver to unscrew the fastener seatpost and stick it.After you remove fasteners summing up to the place where he was rear wing, so that the mounting grooves and the rear wing slots converged.After that, back insert and fasten fasteners seatpost.The second method of fastening the rear wing is more simple than the first.In this case the fixture is mounted directly on the seatpost.Use a screwdriver to unscrew and remove the pin from his seat on top of threaded mount the rear wing.We put the seat back and tighten the screw with a screwdriver.Through this article, you learned how to install fenders on your bike, good luck!