How to synchronize the browser with the computer ?

How to synchronize the browser with the computer ?
You will need:
  • computer
  • USB cord
  • synchronization software
# 1

Using GPS-navigators has recently become widespread.It can be seen in almost every car.But before you start to use it you need to download the map of the area.And for this you need to connect your device to your PC or laptop where the card is stored, that is to make the synchronization.And further on how to synchronize the browser.For this first USB cable need to be supplied in the kit.In addition to the cable you need to install special software on your computer.He also shall be delivered together with the device a pleasure it can be downloaded from the official website of the company.When the software is installed and the power cord is connected, you can one-click to synchronize devices, and then perform the necessary actions.

# 2

cards sometimes differ for different versions of the Navigator, and a box with documents thrown out.In such cases, help advice on how to find the Navigator version.To do this, remove the bac

k cover and the battery of the device, if possible.version of this device will be written under it.The most common version is written directly on the front side of the housing.The following describes how to make a tablet of the navigator.

# 3

This will require a tablet computer and software, ie the card.In order to use the tablet as a navigator you need to download and install it on the map.To do this, perfectly suited Navitel maps Yandex and Google.After installing the software you can use it as a regular browser, but with some additional features.Further details on how to specify the path in the navigator.

# 4

In order to pave the way in the navigator of the person is required only just find a point of arrival, after which the self-navigator will calculate the best route and paving.In addition, you can save frequently used routes in order to avoid wasting time on a route in the future.These routes will be available in the menu stored and run on a clique.This may be a way to home, to work, to the parents or to the garden.This saving will be useful for the cards can see traffic jams and congestion on the roads and are able to lay a new route to overeat congestion to follow the old points.

# 5

When these points get too much, there is a need to clear the browser memory from the old addresses, or even delete everything in it.It is about how to clear browser, and will be discussed further.To do this, you must turn it on.After that, go to the main menu and look for the address list.Most likely, somewhere there is a point of "function" and "clear list".You can completely reformat the memory by changing the browser software.