- PVA glue
Originality and uniqueness appearance of the garden view give garden sculptures, and does not necessarilybuy them or somewhere in order.If desired, they can be made and most, it does not require any special tools and a variety of materials.
As a material for making sculptures, used cement and gypsum, which is always there in any construction market.However, for the sculpture garden will fit and unnecessary, worn out things, of which, showing little imagination, you can create a highly original composition.So what is needed for these purposes, and how to make a sculpture of cement?
First of all, you need to make the frame future sculpture, it will be applied to the solution.The frame is made of wire of different thickness.The riser is made of sturdy wire to it screwed all the other details of the figure of a smaller diameter wire.For stability, the bottom of the riser poured concrete thickness of about three and
For preparation of the impression composition to displace five parts and one part cement plaster.Per kilogram of dry mix added one tablespoon of PVA glue.Water was added in small portions while stirring to the consistency of the resulting mixture turned dense.Cooked weight is applied to the frame, giving the desired shape of the sculpture.Fashioned figure must be dried.Sculpture of cement can crack in the sun, so it must be dried in the shade.Before you paint, it is necessary to impregnate the water-repellent.
You can make and living sculpture.manufacturing principle is the same shape as the shape of the cement.Preparing the frame of wire, but only the volume, yet it will require wire mesh or propylene.Net tightened frame, and then poured the soil and straw, it is necessary to ground did not wake up through the grid.Once in this form are planted flower seedlings and flower seeds.It should be noted that under irrigation, power shower can wash soil from a sculpture.
Alternatively garden sculptures - composition of natural materials.Old stump is quite possible to give a view of the house from a fairy tale.From going to the wire frame in the form of a cone, is the foundation for the house roof, then obtyanuv his old piece of oilcloth, plastered with his pieces of bark, planks or pieces of plywood.To simulate the fire tube is made from a tin tube, which is attached to the stump.It is necessary to drill a hole, the size of tubes prepared in the stump, to liberate her there and ready to put the roof on the foundation.
And for complete similarity with the house, attach it to stump the box out of plywood, it is a window, and a rectangular piece indicating the door.Paint it with waterproof paints.The options decorations garden plot number, it would be the time and desire.Of course, you can just go out and buy ready-made garden sculptures.But he made his own hands, even if it is a little sloppy, much more valuable than a cheap punching sold in the market.